Slide background

Guidelines

Guidelines

We are more than happy to help and guide you in any matter. Here you can find the most typical guidelines.

Sheet sizes

Lamination:

  • › minimum: 260 x 360 mm
    › maximum: 1040 x 1440 mm

UV-full flood varnish and UV-spot varnish:

  • › minimum: 320 x 400 mm
    › maximum: 1040 x 740 mm

Hot foil and emboss/deboss:

  • › minimum: 210 x 280 mm
    › maximum: 1040 x 730 mm

 

Print material and files:

Lamination and full flood UV-varnish:

Leave 5mm space to every edge of the sheet. In the full flood UV-varnish you need to leave 9mm space at the start of the sheet due gripper margin. The space can be plain white or printed surface. We recommend using silicone-free coating on the printed surface to reduce risk of delamination.

UV-spot varnish

Send the UV-spot varnish area in 1:1 PDF file. Use black or other spot colour as varnish area and use white backround. The minimum distance from the start of the sheet and varnish area is 15mm due gripper margin.

The minimum line widths depend on substrate, but the following design rules can be applied:
 - normal spot-UV 200µm
 - relief-spot UV 500µm
 - glitter or sand effect 800µm

Note: the minimum line widths are bigger than above in special materials such as uncoated paper and cardboard or embossed surfaces.

Contact us and let us find the most suitable special varnishing for your purpose. We are more than happy to help you to find the best solution for your product

Hot foil stamping and emboss/deboss:

Send us the area to be embossed/debossed in positioned 1:1 PDF-file. Use black or other spot colour as embossing area and white as background. The minimum distance of embossed/debossed area from the start of the sheet is 15mm due gripper margin.

The recommended minimum line widths depend on substrate and end product, but the following design rules apply to most cases:

  - emboss/deboss 2 x thickness of the substrate

Note: the minimum line widths for special materials, such as uncoated paper and cardboard or embossed materials are bigger than mentioned above. We are more than happy to guide you in this matter.

prem ohjeet2

Prem | Suomenselän Laminointi Oy | 03 475 8777 | info@prem.fi

© Suomenselän Laminointi 2021. All rights reserved. Site by Aidia.